ESIS Publishing House

12th Annual Conference of Society of Structural Integrity and Life (DIVK12) - 2024

2024-12-14

Aims of this international conference was to include researches concerning innovation and recent trends, multidisciplinary approach, as well as case studies, involving structural integrity assessment, risk analysis and safety of engineering structures taking into account environmental effects, materials behaviour, their characterisation, and the specificity of the structure itself. We invited an academic and engineering communities as well to take participation to this event, and to share their knowledge on following areas:
• Structural integrity approach on engineering structures: development and recent trends
• Structural integrity assessment: classic approaches
• Methods for reliability and probabilistic safety assessment
• Investigation on structural integrity of engineering structures under specific loading condition
• Environmental effect concerning structural integrity and material characterisation
• Mechanical characterisation of engineering materials
• Structural integrity of newly developed materials in engineering application
• FEM and analytical modelling of failure under various loading conditions
• Fracture mechanics approach in structural integrity assessment
• Welding and welding constructions as a specific problem: damage analysis, environmental effects and specificity

Organizing Committee

Aleksandar Sedmak, Faculty of Mechanical Engineering, University of Belgrade, Serbia
Branislav Djordjevic, Innovation center of Faculty of Mechanical Engineering in Belgrade, Serbia
Ana Petrovic, Faculty of Mechanical Engineering, University of Belgrade, Serbia
Nenad Zrnic, Innovation center of Faculty of Mechanical Engineering in Belgrade, Serbia
Dragan Bojovic, IMS institute, Belgrade, Serbia
Mhajlo Arandjelovic, Innovation center of Faculty of Mechanical Engineering in Belgrade, Serbia
Simon Sedmak, Innovation center of Faculty of Mechanical Engineering in Belgrade, Serbia
Zoran Radakovic, Faculty of Mechanical Engineering, University of Belgrade, Serbia
Ivana Cvetkovic, Faculty of Mechanical Engineering, University of Belgrade, Serbia
Zeljko Flajs, IMS institute, Belgrade, Serbia
Ksenija Djokovic, IMS institute, Belgrade, Serbia
Isaak Trajkovic, Innovation center of Faculty of Mechanical Engineering in Belgrade, Serbia

The 17th International Conference on MECHANICS, RESOURCE AND DIAGNOSTICS OF MATERIALS AND STRUCTURES (MRDMS 2023)

2024-12-06

Edited by
Sergey Smirnov Prof.
Aleksandar Sedmak Dr.
Evgenii Prosviryakov Prof.
Yuliya Khudorozhkova Dr.
Volume 65,
Pages 1-324 (2024)

The 8th International Conference on Crack Paths - CP2024

2024-11-10

The 8th International Conference on Crack Paths (CP 2024) is organised by TC3 Fatigue of Engineering Materials and Structures of the European Structural Integrity Society (ESIS) and by the Italian Group of Fracture (IGF).
The CP 2024 edition took place in Rimini, Italy and online (10 - 12 September 2024).

Chairpersons

• Sabrina Vantadori, University of Parma
• Francesco Iacoviello, Università di Cassino e del Lazio Meridionale
• Nicholas Fantuzzi, University of Bologna
• Andrea Carpinteri, University of Parma
• Luca Vincenzo Ballestra, University of Bologna

SMAR 2024 – 7th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures

2024-11-10

Edited by
Enzo Martinelli Dr.
Moslem Shahverdi Dr.
Volume 64,
Pages 1-2262 (2024)

22nd International Conference on Modelling in Mechanics 2024

2024-11-04

Edited by
Martin Krejsa Dr.
Majid Movahedi Rad Dr.
Aleksandar Sedmak Dr.
Bartlomiej Blachowski Dr.
Pratanu Ghosh Dr.
Volume 63,
Pages 1-58 (2024)

II Fabre Conference – Existing bridges, viaducts and tunnels: research, innovation and applications (FABRE24)

2024-10-26

Edited by
Walter Salvatore Dr
Andrea Dall’Asta Dr
Volume 62,
Pages 1-1144 (2024)

3rd International Workshop on Plasticity, Damage and Fracture of Engineering Materials (IWPDF 2023)

2024-07-26

Edited by
- Benjamin Klusemann Dr.
- Emilio Martinez-Paneda Dr.
- Tuncay Yalcinkaya Dr.
Volume 61,

Third International Conference on Structural Integrity 2023 (ICONS 2023)

2024-06-06

Edited by
S.A. Krishnan Dr.
A. Nagesha Dr.
A. Moitra Dr.
M. Vasudevan Dr.
Raghu V Prakash Prof.

Volume 60,
Pages 1-734 (2024)

VII International Conference “In-service Damage of Materials: Diagnostics and Prediction (DMDP 2023)"

2024-06-05

Edited by
Oleg YASNIY Dr.
Olha Zvirko Dr.
Hryhoriy Nykyforchyn Dr.
Volodymyr Iasnii Dr.

Volume 59,
Pages 1-798 (2024)

Fatigue Design 2023 (FatDes 2023)

2024-06-02

Edited by Fabien Lefebvre Dr.

Volume 57,

Pages 1-904 (2024)

7th International Conference on Structural Integrity and Durability (ICSID 2023)

2024-06-02

Edited by:

Zeljko Bozic

Siegfried Schmauder

Katarina Monkova

George Pantazopoulos

Sergio Baragetti

Francesco Iacoviello

ESICC 2023 – Energy efficiency, Structural Integrity in historical and modern buildings facing Climate change and Circularity

2024-04-01

Edited by
Chiara Bertolin
Inês Flores-Colen
Vittorio Di Cocco
Stavros K. Kourkoulis
Aleksandar Sedmak

Structural Integrity and Reliability of Advanced Materials obtained trough Additive Manufacturing (SIRAMM23)

Francesco Iacoviello — 2024-04-01

Edited by
Roberto Brighenti
Liviu Marsavina
Aleksandar Sedmak
Filippo Berto
Lubos Nahlik

International Conference on Structural Integrity 2023 (ICSI 2023)

2024-03-04

In the last two years, since the virtual ICSI2021, research activity in Structural Integrity has seen an exponential increase, spilling over several exciting areas in materials, methods, and applications. For the most part, this has been fueled by both the necessity of diversifying energy sources and the societal pressure to cope with climate change and the issues brought about by the required technological development. Research into metal (mis)behavior in the presence of Hydrogen, to cite an example, which has long been an important topic in Structural Integrity, gradually came under the focus of a growing number of scientists due to its importance in Hydrogen storage. In testimony of the importance of this topic, nearly one-fourth of all ICSI2023 accepted abstracts focusing on Hydrogen Embrittlement-related topics.
Concomitantly, the experimental activity related to experimental validation in new simulation concepts and applications, and novel applications for validated simulation models which, for instance, enable sensor virtualization, together with disruptive sensing technologies from the realm of science fiction a mere couple of years ago, are paving the way for a revamped R&D arena, with implications in most Engineering fields. From the very start, five editions ago, ICSI has focused on all aspects and scales of structural integrity, ranging from basics to future trends, with special emphasis on multi-scale and multi-physics approaches, and applications to new materials and challenging environments. Current research topics in the realm of Structural Integrity targeted by ICSI2023 include, but are not limited to Fracture and Fatigue, Stress Analysis, Damage Tolerance, Durability, Crack Closure, Joining Technologies, Nanomechanics and Nanomaterials, Ageing, Coatings Technology, Environmental Effects, Structural Health Monitoring, New materials, Surface Engineering, Integrity of biomechanics structures in and many other exciting research topics.
In 2023, the ICSI organization focused on inviting lecturers related to topics that dominate the contemporary status in Structural Integrity, such as Prof. Frank Cheng from the University of Calgary, working in the field of corrosion engineering and pipeline reliability, Prof. Su Taylor from Queen’s University in Belfast, devoted to the development of structural health monitoring of sustainable infrastructure; Prof. José Correia from Porto University, fully engaged in Structural Integrity of energy infrastructure; Prof. César Azevedo well known for his contribution in structural failure and Prof. Zagorac, from Belgrade University, working in the field of material behavior under extreme conditions. Like previous editions, ICSI2023 has been organized into a general track and a number of thematic symposia. Apart from Procedia Structural Integrity, a special issue from Engineering Failure Analysis will cover ICSI2023.
The response to the organization’s efforts has been outstanding: Thirteen symposia were proposed; the number of abstract submissions was kept at a similar level to previous editions, with around 200 approved for oral communication.
These are very challenging times for the organization of meaningful conferences, but the organizers strived to make this 5th Edition a memorable one, which will stimulate both young and well-known researchers in the field to contribute further to ICSI.

Third European Conference on the Structural Integrity of Additively Manufactures Materials (ESIAM23)

2024-02-11

Edited by
Filippo Berto Professor
Francesco Iacoviello Professor
Abílio De Jesus Professor
Jan Torgersen Professor
Sabrina Vantadori Professor

Fracture, Damage and Structural Health Monitoring

2024-02-04

Guest editors:
Ali Mehmanparast
Zahra Sharif Khodaei
Ferri Aliabadi

ICF13A - 2013

2023-12-30

ICF13
Beijing (China)
2013

ICF13B - 2013

2023-12-30

ICF13
Beijing (China)
2013

ICF13C - 2013

2023-12-30

ICF13
Beijing (China)
2013

ICF12 - 2009

2023-12-29

ICF12

Ottawa (Canada)

2009

ICF11 2005

2023-12-28

ICF11
Torino (Italy)
2005

ICF10A - 2001

2023-12-27

ICF10
Honolulu (USA)
2001

ICF10B - 2001

2023-12-27

ICF10
Honolulu (USA)
2001

ICF10C - 2001

2023-12-27

ICF10
Honolulu (USA)
2001

ICF10D - 2001

2023-12-27

ICF10
Honolulu (USA)
2001

ICF9-A 1997

2023-12-26

ICF 9

Sydney, Australia

1997

ICF9-B 1997

2023-12-26

ICF 9

Sydney, Australia

1997

ICF9-C 1997

2023-12-26

ICF 9

Sydney, Australia

1997

3rd International Workshop on Plasticity, Damage and Fracture of Engineering Materials

Tuncay Yalcinkaya — 2023-12-01

4-6 October 2023,

Instanbul, Turkiye

6th International Conference on Structural Integrity and Durability (ICSID 2022)

2023-11-28

Edited by:

Zeljko Bozic
Siegfried Schmauder
Katarina Monkova
George Pantazopoulos
Sergio Baragetti
Goran Vukelic
Francesco Iacoviello

16th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures (MRDMS 2022)

2023-11-18

Edited by

Evgeny Prosviryakov Professor
Yulia Khudorozhkova Dr.

23rd European Conference on Fracture

2023-11-11

2022

Funchal, Madeira, Portugal

2nd International Conference on Medical Devices: Materials, Mechanics and Manufacturing (ICMD3M 2023)

2023-11-01

Edited by Vadim Silberschmidt, Sotiris Korossis
Volume 49,
Pages 1-88 (2023)

The third European Conference on the Structural Integrity of Additively Manufactured Materials ESIAM23

2023-10-22

Porto, Portugal, & Web, September 4-6, 2023

Structural integrity, i.e. the fracture and fatigue strength of additively manufactured materials and components is becoming increasingly important with the technology’s transition towards major industrial utilization. The conference provided an overview over current scientific knowledge and stimulate ideas for future research directions in this emerging field. The agenda allowed for extended discussions and for exploring Porto at the end of summer. ESIAM23 is the second event in presence of the ESIAM series following the success of the first event in Trondheim 2019 (and the online conference held in 2021).

Organizing Committee

Sara Bagherifard, Politechnic of Milan
Matteo Benedetti, Univ. Trento
Filippo Berto, Univ. Rome "Sapienza"
José Correia, FEUP & IDMEC
Jianying He, NTNU
Francesco Iacoviello, Univ. of Cassino and Southern Lazio
Abílio de Jesus (local chairman), FEUP & INEGI
Luis Reis (local chairman), IST-UL & IDMEC
Ana Réis, FEUP & IDMEC
Manuel Sardinha, IST-UL & IDMEC
Raffaele Sepe, Univ. di Salerno
Luca Susmel, Univ. Sheffield
Jan Torgersen, Technische Universität München
Brecht Van Hooreweder, KU Leuven
Sabrina Vantadori, Univ. of Parma

ICF8A - 1993

2023-09-10

ICF8

1993

Kiev (Ukraine)

ICF8-B 1993

2023-09-10

ICF8

1993

Kiev (Ukraine)

ICF7-A 1989

2023-08-31

ICF7

Houston (USA)

1989

ICF7-B 1989

2023-08-31

ICF7

Houston (USA)

1989

ICF4-A 1977

2023-08-28

ICF4

Waterloo (Canada)

1977

ICF4-B 1977

2023-08-28

ICF4

Waterloo (Canada)

1977

ICF4-C 1977

2023-08-28

ICF4

Waterloo (Canada)

1977

ICF5 - 1981

2023-08-28

ICF5

Cannes (France)

1981

ICF2 - 1969

2023-08-26

ICF2
Brighton (UK)
1969

ICF3-A 1973

2023-08-26

ICF3
Munich (Germany)
1973
Vol. A

ICF3-B 1973

2023-08-26

ICF3
Munich (Germany)
1973
Vol. B

ICF1 - 1965

2023-08-25

ICF1

Japan

1965

ICF0 - 1959

2023-08-23

ICF0
Swampscot -MA (USA)
1959

5th International Conference on Structural Integrity and Durability

Zeljko Bozic — 2023-08-04

Edited by Zeljko Bozic, Siegfried Schmauder, Katarina Monkova, George Pantazopoulos, Sergio Baragetti, Francesco Iacoviello

Volume 46

27th International Conference on Fracture and Structural Integrity (IGF27)

Francesco Iacoviello — 2023-08-04

IGF (Italian Group of Fracture) organized the IGF27, the 27th International Conference on Fracture and Structural Integrity (February 21-24, 2023). The event was held at the Engineering Faculty of Rome "Sapienza". A remote participation was also allowed.

Chairpersons:

Filippo Berto, "Sapienza" Università di Roma - NTNU
Vittorio Di Cocco, Università di Cassino e del Lazio Meridionale
Giuseppe Andrea Ferro, Politecnico di Torino
Francesco Iacoviello, Università di Cassino e del Lazio Meridionale
Stefano Natali, "Sapienza" Università di Roma
Daniela Pilone, "Sapienza" Università di Roma
Sabrina Vantadori, Università di Parma

Second International Symposium on Risk Analysis and Safety of Complex Structures and Components (IRAS 2023)

Aleksandar Sedmak — 2023-08-04

Edited by

Aleksandar Sedmak
Simon Sedmak
Branislav Djordjevic

17th Asia-Pacific Conference on Fracture and Strength and the 13th Conference on Structural Integrity and Failure (APCFS 2022 & SIF 2022)

Andrei Kotousov — 2023-06-19

Edited by Andrei Kotousov, Ching Tai Ng, Wenyi Yan
Volume 45,
Pages 1-148 (2023)

Second International Symposium on Risk Analysis and Safety of Complex Structures and Components (IRAS 2023)

Aleksandar Sedmak — 2023-06-14

The Second International Symposium on Risk Analysis and Safety of Complex Structures and Components (IRAS 2023) is organised by ESIS TC12 on Risk Analysis and Safety of Large Structures and Components (in-team TC12), which will take place in Belgrade, Serbia, located at the confluence of two large rivers, Sava and Danube, 2-4 April 2023. This Symposium is intended to be a forum of discussion of the recent advances in maintenance, safety, risk analysis, probabilistic assessment, life-cycle performance, fatigue, fracture, damage mechanics, numerical simulation of a wide range of infrastructures, such as, engineering technical systems, transportation systems, bridges, buildings, dams, railways, underground constructions, wind and transmission towers, offshore platforms, pipelines, naval vessels, oceanic structures, nuclear power plants, airplanes and other types of structures including aerospace and automotive structures are considered. It is expected contributions from engineers, metallurgists, material scientists, among others, allowing a very multidisciplinary discussion.

ORGANIZING COMMITTEE

Aleksandar Sedmak, University of Belgrade, Serbia
Milos Milosevic, Innovation centre of Faculty of Mechanical Engineering, Serbia
Isaak Trajkovic, Innovation centre of Faculty of Mechanical Engineering, Serbia
Branislav Djordjevic, Innovation centre of Faculty of Mechanical Engineering, Serbia
Milos Djukic, University of Belgrade, Serbia
Ana Petrovic, University of Belgrade, Serbia
Simon Sedmak, Innovation centre of Faculty of Mechanical Engineering, Serbia

IGF27 - 27th International Conference on Fracture and Structural Integrity

ESIS Publishing House — 2023-04-15

February 21-24, 2023, Rome (Italy) & Web

Organizing Committee

Filippo Berto, "Sapienza" Università di Roma - NTNU
Vittorio Di Cocco, Università di Cassino e del Lazio Meridionale
Giuseppe Andrea Ferro, Politecnico di Torino
Francesco Iacoviello, Università di Cassino e del Lazio Meridionale
Stefano Natali, "Sapienza" Università di Roma
Daniela Pilone, "Sapienza" Università di Roma
Sabrina Vantadori, Università di Parma

XIX ANIDIS Conference, Seismic Engineering in Italy

Luciana Restuccia — 2023-02-10

Guest editors: Luciana Restuccia, Giuseppe Andrea Ferro

Materials Structure & Micromechanics of Fracture

Jaroslav Pokluda — 2023-01-17

Materials Structure & Micromechanics of Fracture (MSMF1 0),
msmf.fme.vutbr.cz

Guest editors:
Jaroslav Pokluda,Brno University of Technology, Czech Republic
Pavel Šandera, Brno University of Technology, Czech Republic

ECF23: 23 rd European Conference on Fracture

Pedro Moreira — 2023-01-03

The International European Conference on Fracture (ECF23) was organized from 27 June to 1 July 2022. ECF started out in 1973 in France, as the 1st European Colloquium on Fracture, and rapidly become a reference event focused on Fracture Mechanics and Structural Integrity related topics. It has been traveling around Europe, and the previous event was held in Belgrade in 2018. It has the mission to promote research focused on topics related to all fracture phenomena, structural integrity and monitoring, contributing for the improvement of the reliability of systems, through focused R&D in applied mechanics.

This conference was the twentieth edition of a globally recognized event in the field of structural mechanics. The importance of the event required us to apply for its organization in 2014 in its edition in Trondheim, Norway. Since then, it has passed through Catania and Belgrade, now having Funchal as its destination in 2022, after the postponement due to the pandemic situation in 2020. A Summer School was also included in this organization from the 25th to the 26th of June, held at the premises of the Rectory of the University of Madeira. This first event was mainly dedicated to young students and researchers, who can enjoy the experience of renowned speakers and exchange experiences with each other.

Despite all difficulties related to the pandemic, the scientific community response was outstanding: a total of 505 delegates from 40 countries attended the event. A total of 616 abstracts were submitted, and 457 were accepted for oral presentations, divided in 96 parallel sessions, and 71 for Poster presentations. Apart from the publication of the proceedings in Procedia Structural Integrity, special issues in Theoretical and Applied Fracture Mechanics, Engineering Fracture Mechanics, International Journal of Fatigue and Engineering Failure Analysis were also offered. In the two days prior to the ECF23 conference, a Summer School on Fracture Mechanics and Structural Integrity took place, and four well known Lecturers attracted the presence of 90 delegates.

2nd International Workshop on Plasticity, Damage and Fracture of Engineering Materials

Tuncay Yalcinkaya — 2022-11-24

18-20 August, 2021

Ankara, Turkey

The 1st International Workshop on Plasticity, Damage and Fracture of Engineering Materials

Tuncay Yalcinkaya — 2022-11-24

22-23 August, Ankara, Turkey

Mathematical Physics

Dragoslav Kuzmanović — 2022-11-20

This book is mainly based on the material initially published in Serbian, in 2021, by the University of Belgrade, Faculty of Mining and Geology, under the title Mathematical Physics (Theory and Examples). For the purpose of this book the material from the Serbian edition was reviewed, amended, and translated, with new material added in two final chapters in the second volume. We have divided text into two separate volumes:

Mathematics of Physics - Analytical Methods
Mathematics of Physics - Numerical Methods.

The first volume consists of 8 chapters:

- The first 7 chapters were written by Dragoslav Kuzmanovi´c, Dobrica Nikoli´c and Ivan Obradovi´c, and correspond to the text from Chapters 1-8 of the Serbian edition, translated by Ivan Obradovi´c.
- The material of Chapter 8, which is of a monographic character, corresponds to the material of Chapter 9 in the Serbian edition, but was thoroughly reviewed and rewritten in English by Mihailo Lazarevi´c.

The second volume consists of 6 chapters:

- The first 3 chapters were written by Aleksandar Sedmak and correspond to Chapter 10 of the Serbian edition, restructured and reviewed, and then translated by Simon Sedmak.
- Chapter 4 corresponds to the text of Chapter 11 of the Serbian edition, written and translated by Nikola Mladenovi´c.
- Chapters 5 and 6, written by Rade Vignjevi´c and Sreten Mastilovi´c, respectively, offer completely new material.

Chapters 4, 5 and 6 are of a monographic character.

Mathematical Physics

Aleksandar Sedmak — 2022-11-20

Mathematics of Physics - Analytical Methods
Mathematics of Physics - Numerical Methods.

The first volume consists of 8 chapters:

The second volume consists of 6 chapters:

Chapters 4, 5 and 6 are of a monographic character.

ICMFF12 - 12th International Conference on Multiaxial Fatigue and Fracture

ESIS Publishing House — 2022-11-07

Bordeaux, France, June 24-26, 2019
T. Palin-Luc, F. Morel and A. Carpinteri (Eds.)

The aim of this conference was to share the latest developments in multiaxial fatigue and fracture by scientists and engineers from all over the world. New researches as well as applications in industry were of interest. This conference was a good opportunity for experimentalists, theoreticians, industrial practitioners and academic experts to discuss current progress and to build a bridge between their areas of expertise. Presentations on experimental set-ups, material characterization, analytical models, numerical models, etc. were all welcome.

Organized by SF2M - Societe Francaise de Metallurgie et de Materiaux

ICMFF10 - 10th International Conference on Multiaxial Fatigue & Fracture

ESIS Publishing House — 2022-11-07

Kyoto (Japan), 3-6 June, 2013-Suzaku Campus, Ritsumeikan University

Conference Chairman

Andrea Capinteri, Parma, Italy

Masao Sakane, Shiga, Japan

Shan-Dong Tu, Shanghai, China

ICMFF9 - International Conference on Multiaxial Fatigue & Fracture

ESIS Publishing House — 2022-11-07

Parma (Italy), 7 - 9 June, 2010 - University of Parma

Conference Chairmen

Andrea Carpinteri, Parma

Les P. Pook, London

C. M. Sonsino, Darmstadt

ICBMFF5 - 5th International Conference on Biaxial and Multiaxial Fatigue and Fracture

ESIS Publishing House — 2022-11-07

Cracow, Poland (1997)

ICBMFF4 - 4th International Conference on Biaxial and Multiaxial Fatigue and Fracture

ESIS Publishing House — 2022-11-07

St. Germain-en-Laye, France (1994)

ICBMFF3 - 3rd International Conference on Biaxial and Multiaxial Fatigue and Fracture

ESIS Publishing House — 2022-11-07

Stuttgart, Germany (1989)

ICBMFF2 - 2nd International Conference on Biaxial and Multiaxial Fatigue and Fracture

ESIS Publishing House — 2022-11-07

Sheffield, UK (1985)

23rd European Conference on Fracture

ESIS Publishing House — 2022-11-06

23rd European Conference on Fracture – ECF23 was held in Funchal, Madeira (Portugal), June 27 – July 1, 2022.

Chairmen
Pedro Moreira, INEGI, Portugal
Luis Reis, IST, Portugal

ESIS Summer School -2022 - Funchal, Madeira (Portugal)

ESIS Publishing House — 2022-11-06

This ESIS Summer School was organized in the frame of the ECF23 that was held in 2022 in Funchal, Madeira (Portugal).

Lecture Notes

ESIS Publishing House — 2022-11-02

This book collects the lecture notes written by George Irwin in 1972

Fundamentals of Fracture Mechanics

ESIS Publishing House — 2022-11-02

This book is an important addition to the bookshelves of those metallurgists and engineering who are striving to produce stronger and more durable constructions and materials, as well as being essential reading for final year materials science and engineering students

1st Virtual Conference on Structural Integrity - VCSI1

ESIS Publishing House — 2022-10-30

Online 2020

The First Virtual Conference on Structural integrity was organized by four active National Groups of the European Structural Integrity Society (ESIS): APFIE (Portuguese Structural integrity Society, Portugal), DIVK (Društvo za integritet i vek konstrukcija „Prof. dr Stojan Sedmak“, Serbia), GSEMM (Greek Society of Experimental Mechanics of Materials, Greece) and IGF (Italian Group of Fracture, Italy), under the aegis of ESIS.

2nd Mediterranean Conference on Fracture and Structural Integrity

ESIS Publishing House — 2022-10-30

2022

Catania & Online

The Algerian Group of Fracture Mechanics and Energy (AGFME), the Greek Society of Experimental Mechanics of Materials (GSEMM), the Italian Group of Fracture (IGF) and the Sociedad Espanola de Integridad Estructural - Grupo Espanol de Fractura (SEIE-GEF) organized the second edition of the MedFract, the “2nd Mediterranean Conference on Fracture and Structural Integrity, MedFract2”

First Multi-Lateral Workshop on “Fracture and Structural Integrity related Issues”

ESIS Publishing House — 2022-10-30

Catania 2014.

The event was organized by:

- Gruppo Italiano Frattura (IGF)

- Portuguese Structural Integrity Society (SPFIE)

- Sociedad Española de Integridad Estructural Grupo Español de Fractura (GEF)

IGF Workshop 2009: Progettazione a fatica di giunzioni saldate (... e non)

ESIS Publishing House — 2022-10-30

Forni di Sopra (UD), Italy

March 9-10, 2009

IGF Workshop 2010: Problematiche di Frattura nei materiali per l'Ingegneria

ESIS Publishing House — 2022-10-30

IGF Workshop 2010

Forni di Sopra (UD)

IGF Workshop 2011: First IJFatigue & FFEMS Joint Workshop

ESIS Publishing House — 2022-10-30

March 7-9.

Forni di Sopra

IGF Workshop 2012: Problematiche di frattura ed integrità strutturale di materiali e componenti ingegneristici

ESIS Publishing House — 2022-10-30

March 1-2, 2012,

Forni di Sopra

Second IJFatigue & FFEMS Joint Meeting

ESIS Publishing House — 2022-10-30

Malaga, Spain

2013

IGF Workshop 2015: Third IJFatigue & FFEMS Joint Workshop

ESIS Publishing House — 2022-10-30

20-22 April 2015

Characterisation of Crack Tip Fields
Urbino, Italy

IGF Workshop 2015: Challenges in Multiaxial Fatigue

ESIS Publishing House — 2022-10-30

1st International Workshop on Challenges in Multiaxial Fatigue
Urbino, Italy
22-24 April 2015

4th IJFatigue & FFEMS Joint Workshop

ESIS Publishing House — 2022-10-30

The 4th IJF & FFEMS CRACK TIP FIELD WORKSHOP

Bonifacio, France
10-12 April 2017

The 2nd IJF & FFEMS CHALLENGES IN MULTIAXIAL FATIGUE

ESIS Publishing House — 2022-10-30

Bonifacio, France
12-14 April 2017

The 2nd IJF & FFEMS
CHALLENGES IN MULTIAXIAL FATIGUE

IGF Workshop 2018: Fracture and Structural integrity: ten years of ‘Frattura ed Integrità Strutturale’

ESIS Publishing House — 2022-10-30

Cassino, Italy,

June 4-6, 2018

21st European Conference on Fracture

ESIS Publishing House — 2022-10-29

Catania, Italy

2016

22nd European Conference on Fracture

ESIS Publishing House — 2022-10-29

2018

Belgrade, Serbia

1st Virtual European Conference on Fracture

ESIS Publishing House — 2022-10-29

2020

Online (due to Covid-19 pandemia)

1st Mediterranean Conference on Fracture and Structural Integrity, MedFract1

ESIS Publishing House — 2022-10-29

Athens, Greece

2020

Organized by the Greek Society of Experimental Mechanics of Materials (GSEMM) and the Italian Group of Fracture (IGF)

IGFXXII - 22nd IGF Conference

ESIS Publishing House — 2022-10-28

2013 Roma
IGFXXII - Italian Group of Fracture Conference
Acta Fracturae (ISSN 2281-1443)

IGFXXIII - 23rd IGF Conference

ESIS Publishing House — 2022-10-28

2015 Favignana
IGFXXIII - Italian Group of Fracture Conference

IGFXXIV - 24th IGF Conference

ESIS Publishing House — 2022-10-28

2017 Urbino
IGFXXIV - Italian Group of Fracture Conference

IGFXXV - 25th IGF Conference

ESIS Publishing House — 2022-10-28

2019 Catania
IGFXXV - Italian Group of Fracture Conference
25th International Conference on Fracture and Structural Integrity

IGFXXVI - 26th IGF Conference

ESIS Publishing House — 2022-10-28

2021 Torino & web
IGFXXVI - Italian Group of Fracture Conference
26th International Conference on Fracture and Structural Integrity

IGFIX - 9th IGF Conference

ESIS Publishing House — 2022-10-27

1993 Milano
IGFIX - Italian Group of Fracture Conference
Acta Fracturae (ISSN 2281-1443)

ISBN 978-88-95940-05-2

IGFX - 10th IGF Conference

ESIS Publishing House — 2022-10-27

1994 Torino
IGFX - Italian Group of Fracture Conference
Acta Fracturae (ISSN 2281-1443)

ISBN 978-88-95940-06-9

IGFXI - 11th IGF Conference

ESIS Publishing House — 2022-10-27

1995 Brescia
IGFXI - Italian Group of Fracture Conference
Acta Fracturae (ISSN 2281-1443)

ISBN 978-88-95940-07-6

IGFXII - 12th IGF Conference

ESIS Publishing House — 2022-10-27

1996 Parma
IGFXII - Italian Group of Fracture Conference
Acta Fracturae (ISSN 2281-1443)

ISBN 978-88-95940-08-3

IGFXIII - 13th IGF Conference

ESIS Publishing House — 2022-10-27

1993 Cassino
IGFXIII - Italian Group of Fracture Conference
Acta Fracturae (ISSN 2281-1443)

ISBN 978-88-95940-10-6

IGFXIV - 14th IGF Conference

ESIS Publishing House — 2022-10-27

1998 Trento
IGFI - Italian Group of Fracture Conference
Acta Fracturae (ISSN 2281-1443)

ISBN 978-88-95940-11-3

IGFXV - 15th IGF Conference

ESIS Publishing House — 2022-10-27

2000 Bari
IGFI - Italian Group of Fracture Conference
Acta Fracturae (ISSN 2281-1443)

ISBN 978-88-95940-12-0

IGFXVI - 16th IGF Conference

ESIS Publishing House — 2022-10-27

2002 Catania
IGFI - Italian Group of Fracture Conference
Acta Fracturae (ISSN 2281-1443)

ISBN 978-88-95940-13-7

IGFXVII - 17th IGF Conference

ESIS Publishing House — 2022-10-27

2004 Bologna
IGFI - Italian Group of Fracture Conference
Acta Fracturae (ISSN 2281-1443)

ISBN 978-88-95940-16-8

IGFXVIII - 18th IGF Conference

ESIS Publishing House — 2022-10-27

2006 Cetraro
IGFXVIII - Italian Group of Fracture Conference
Acta Fracturae (ISSN 2281-1443)

ISBN 978-88-95940-18-2

IGFXIX - 19th IGF Conference

ESIS Publishing House — 2022-10-27

2007 Milano
IGFXIX - Italian Group of Fracture Conference
Acta Fracturae (ISSN 2281-1443)

ISBN 978-88-95940-19-9

IGFXX - 20th IGF Conference

ESIS Publishing House — 2022-10-27

2009 Torino
IGFXX - Italian Group of Fracture Conference
Acta Fracturae (ISSN 2281-1443)

ISBN 978-88-95940-25-0

IGFXXI - 21st IGF Conference

ESIS Publishing House — 2022-10-27

2011 Cassino
IGFXXI - Italian Group of Fracture Conference
Acta Fracturae (ISSN 2281-1443)

ISBN 978-88-95940-36-6

IGFI - 1st IGF Conference

ESIS Publishing House — 2022-10-26

1983 Milano.

IGFI. Italian Group of Fracture Conference

Acta Fracturae. (ISSN 2281-1443)

IGFIII - 3rd IGF Conference

ESIS Publishing House — 2022-10-26

1986 Torino.
IGFIII. Italian Group of Fracture Conference
Acta Fracturae. (ISSN 2281-1443)

ISBN 978-88-95940-00-7

IGFIV - 4th IGF Conference

ESIS Publishing House — 2022-10-26

1988 Milano.
IGFI. Italian Group of Fracture Conference
Acta Fracturae. (ISSN 2281-1443)

ISBN 978-88-95940-01-4

IGFV - 5th IGF Conference

ESIS Publishing House — 2022-10-26

1989 Trento.
IGFV Italian Group of Fracture Conference
Acta Fracturae. (ISSN 2281-1443)

ISBN 978-88-95940-23-6

IGFVI - 6th IGF Conference

ESIS Publishing House — 2022-10-26

1990 Ancona
IGFVI. Italian Group of Fracture Conference
Acta Fracturae. (ISSN 2281-1443)

ISBN 978-88-95940-02-1

IGFVII - 7th IGF Conference

ESIS Publishing House — 2022-10-26

1991 Firenze
IGFVII. Italian Group of Fracture Conference
Acta Fracturae. (ISSN 2281-1443)

ISBN 978-88-95940-03-8

IGFVIII - 8th IGF Conference

ESIS Publishing House — 2022-10-26

1992 Genova
IGFVIII - Italian Group of Fracture Conference
Acta Fracturae (ISSN 2281-1443)

ISBN 978-88-95940-04-5

Crack Paths 2006

ESIS Publishing House — 2022-10-11

University of Parma

Parma, IT

September 14-16, 2006

Crack growth can take place under both static and fatigue loading. The complete solution of a crack growth problem includes the determination of the path taken by the crack. The crack path in a critical component or structure in aerospace, automotive, offshore and other industries can determine whether failure is benign or catastrophic. Knowledge of potential crack paths is also needed for the selection of appropriate non-destructive testing procedures. Agreement between theoretically predicted and experimentally determined crack paths is often poor, and there is relatively little information available on how to ensure that a crack path is benign.

The determination of crack paths is a matter of concern to engineers, industry experts and research scientists, from both a fundamental science standpoint and a technological one. The International Conference on Crack Paths will bring together both fatigue and fracture experts from Industries, Universities and so on, to exchange recent information and provide a discussion forum on how to promote research and development in this field early in the 21st Century.

The scope of this Conference is to focus on the state-of-the-art experimental techniques, and numerical and analytical models for the determination of crack paths in solids made of a broad range of materials, together with the application of crack path data to the design of components and structures subjected to both static and fatigue loading.

This Conference follows the Conference on Fatigue Crack Paths (FCP 2003) held in Parma in September 2003. A special issue of the International Journal of Fatigue and Fracture of Engineering Materials and Structures (Vol.28, No.1-2, 2005) has been devoted to works presented at that Conference.

Crack Paths 2009

ESIS Publishing House — 2022-10-11

Vicenza, IT
September 23-25, 2009

Crack growth can take place under both static and fatigue loading. The complete solution of a crack growth problem includes the determination of the path taken by the crack. The crack path in a critical component or structure in aerospace, automotive, offshore and other industries can determine whether failure is benign or catastrophic. Knowledge of potential crack paths is also needed for the selection of appropriate non-destructive testing procedures. Agreement between theoretically predicted and experimentally determined crack paths is sometimes poor, and further information is needed on how to ensure that a crack path is benign.

This Conference follows the Conferences FCP 2003 and CP 2006, held in Parma, Italy. Special issues of International journals have been devoted to work presented at those Conferences (Fatigue and Fracture of Engineering Materials and Structures, Vol.28, No.1-2, 2005, and Engineering Fracture Mechanics, Vol.75, No.3-4, 2008).

Members of different industries and scientists from all over the world are invited to contribute with presentations on any of the following topics (in the case of both static and fatigue loading):

Experimental Determination of CP
Theoretical Prediction of CP
Life Assessment Methods based on CP Evaluation
Microscopic Aspects of CP
CP of Surface Cracks
CP of Short Cracks
Effect of Large Scale Yielding on CP
Effect of Material Inhomogeneities on CP
Effect of Non-Proportional Cyclic Loading on CP
Effect of Environmental Conditions on CP
CP in Advanced Materials
Laboratory Methods of Controlling CP
In-Service Inspection of CP
Application of CP Concepts and Data in Design
Industrial Application of CP Concepts and Data

Crack Paths 2012

ESIS Publishing House — 2022-10-11

The 4th International Conference on "Crack Paths" (CP 2012)

Gaeta, Italy, 19 - 21 September, 2012

Conference Chairmen

Andrea Carpinteri, Parma, Italy

Francesco Iacoviello, Cassino, Italy

Les P. Pook, Sevenoaks, UK

Luca Susmel, Sheffield, UK

Crack Paths 2015

ESIS Publishing House — 2022-10-11

The Fifth International Conference on Crack Paths

Ferrara (Italy), 16 - 18 September, 2015

Crack growth can take place under both static and fatigue loading. The complete solution of a crack growth problem includes the determination of the path taken by the crack. The crack path in critical components or structures where crack propagation occurs (offshore, bridges, etc.) can determine whether failure is benign or catastrophic. Knowledge of potential crack paths is also needed for the selection of appropriate non-destructive testing procedures. This Conference follows the Conferences in Parma in 2003 and 2006, Vicenza in 2009, and Gaeta in 2012. Special issues of international journals have been devoted to work presented at those Conferences.

Crack Paths 2018

ESIS Publishing House — 2022-10-11

The 6th International Conference on Crack Paths (CP 2018)

Verona, Italy, 19-21 September, 2018

Crack growth can take place under both static and fatigue loading. The complete solution of a crack growth problem includes the determination of the path taken by the crack. The crack path in critical components or structures where crack propagation occurs (offshore, bridges, etc.) can determine whether failure is benign or catastrophic. Knowledge of potential crack paths is also needed for the selection of appropriate non-destructive testing procedures.
This Conference follows the Conferences in Parma in 2003 and 2006, Vicenza in 2009, Gaeta in 2012, and Ferrara in 2015. Special issues of international journals have been published after those Conferences.

Conference Chairpersons
Filippo Berto, Trondheim,Norway
Andrea Carpinteri, Parma, Italy
Youshi Hong, Beijing, China
Les P. Pook, Sevenoaks, UK
Sabrina Vantadori, Parma, Italy

Crack Paths 2021

ESIS Publishing House — 2022-10-11

The 7th International Conference on Crack Paths (CP 2021) is organised by TC3 Fatigue of Engineering Materials and Structures of the European Structural Integrity Society (ESIS). The CP 2021 edition was organized as a virtual event (September 21st to 24th, 2021) due to disorders caused by the pandemic COVID-19 situation.

Main Topics of the Conference

Crack growth can take place under both static and fatigue loading. The complete solution of a crack growth problem includes the determination of the crack path. The crack path in critical components or structures where crack propagation occurs can determine whether failure is benign or catastrophic. Knowledge of potential crack paths is also needed for the selection of appropriate non-destructive testing procedures.

This Conference follows the Conferences in Parma in 2003 and 2006, Vicenza in 2009, Gaeta in 2012, Ferrara in 2015, and Verona in 2018.

Members of different industrial laboratories and scientists from all over the world are invited to contribute with presentations on any of the following topics (in the case of both static and fatigue loading):

Experimental Determination of CP
Theoretical Prediction of CP
Integrity Assessments based on CP Evaluation
Microscopic Aspects of CP
CP of Surface Cracks
CP of Short Cracks
Effect of Large Scale Yielding on CP
Effect of Material Inhomogeneities on CP
Effect of Non-Proportional Cyclic Loading on CP
Effect of Environmental Conditions on CP
CP in Advanced Materials
Laboratory Methods of Controlling CP
In-Service Inspection of CP
Application of CP Concepts and Data in Design
CP in Additive Manufacturing Processes
Industrial Application of CP Concepts and Data

Fatigue Crack Paths 2003

ESIS Publishing House — 2022-10-09

Fatigue Crack Paths 2003

Parma, Italy

September 18-20, 2003

Extension of the virtual crack closure technique and Clifford formalism

Elad Farkash — 2022-10-07

The Virtual Crack Closure Technique (VCCT) was first presented in 1977 for calculating stress intensity factors of cracks in linear elastic, homogenous and isotropic material. It makes use oof the Irwin crack closure integral to obtain values of the modes I, II and III energy release rates from finite data. Using the energy release rate, the stress intensity factors may be obtained. In the literature, failure criteria make use of the stress intensity factors. Thus, accurate values for the stress intensity factors are valuable. It was seen in the literature that i was difficult to obtain accurate results for interface cracks with VCCT. In Banks-Sills and Farkash (2016), a criterion was proposed to overcome this difficulty for this method allowing accurate calculation of stress intensity factors for two-dimensional problems of an interface crack between two dissimilar linea elastic, homogenous and isotropic materials with fine meshes. For this criterion, new energy release rates were presented, namely, the dual energy release rates. The virtual crack extension (VCE) consists of a number of elements rather than one element as was used in previous studies. The new criterion indicates the optimal number of elements to be used as the VCE.

2nd European Conference on Fracture

ESIS Publishing House — 2022-10-06

Darmstadt, Germany

1978

3rd European Conference on Fracture

ESIS Publishing House — 2022-10-06

London, UK

1980

4th European Conference on Fracture

ESIS Publishing House — 2022-10-06

Lisbon, Portugal

1982

5th European Conference on Fracture

ESIS Publishing House — 2022-10-06

Leoben, Austria

1984

6th European Conference on Fracture

ESIS Publishing House — 2022-10-06

Amsterdam, Netherlands,

1986

7th European Conference on Fracture

ESIS Publishing House — 2022-10-06

Budapest, Hungary

1988

8th European Conference on Fracture

ESIS Publishing House — 2022-10-06

Torino, Italy

1990

9th European Conference on Fracture

ESIS Publishing House — 2022-10-06

Varna, Bulgaria

1992

10th European Conference on Fracture

ESIS Publishing House — 2022-10-06

Berlin, Germany

1994

11th European Conference on Fracture

ESIS Publishing House — 2022-10-06

Poitiers, France

1996

12th European Conference on Fracture

ESIS Publishing House — 2022-10-06

Sheffield, UK

1998

13th European Conference on Fracture

ESIS Publishing House — 2022-10-06

San Sebastian, Spain

2000

14th European Conference on Fracture

ESIS Publishing House — 2022-10-06

Crackow, Poland

2002

15th European Conference on Fracture

ESIS Publishing House — 2022-10-06

Stockholm, Sweden

2004

16th European Conference on Fracture

ESIS Publishing House — 2022-10-06

Alexandroupolis, Greece

2006

17th European Conference on Fracture

ESIS Publishing House — 2022-10-06

Brno, Czech Republic

2008

18th European Conference on Fracture

ESIS Publishing House — 2022-10-06

Dresden, Germany

2010

19th European Conference on Fracture

ESIS Publishing House — 2022-10-04

Kazan, Russia 2012

1st International Workshop on Plasticity, Damage and Fracture of Engineering Materials, IWPDF 2019, 22-23 August 2019, Ankara, Turkey

ESIS Publishing House — 2022-10-03

Edited by Cihan Tekoglu, Tuncay Yalçinkaya
Volume 21,
Pages 1-232 (2019)

First International Symposium on Risk Analysis and Safety of Complex Structures and Components (IRAS 2019)

ESIS Publishing House — 2022-10-03

Edited by Abílio M.P. de Jesus, António Abel Henriques, José A.F.O. Correia, José M.F. Castro, Pedro Montenegro, Rui A.B. Calçada
Volume 22,
Pages 1-406 (2019)

9th International Conference Materials Structure & Micromechanics of Fracture (MSMF9)

ESIS Publishing House — 2022-10-03

Edited by Jaroslav Pokluda, Pavel Sandera
Volume 23,
Pages 1-626 (2019)

AIAS 2019 International Conference on Stress Analysis

ESIS Publishing House — 2022-10-03

Edited by Franco Furgiuele, Nicola Bonora, Luigi Bruno, Filippo Cianetti, Giovanni Meneghetti, Giuseppe Mirone, Marco Sasso, Francesco Iacoviello
Volume 24,
Pages 1-996 (2019)

1st Virtual Conference on Structural Integrity - VCSI1

ESIS Publishing House — 2022-10-03

Edited by Filippo Berto, Francesco Iacoviello, Stavros Kourkoulis, Pedro Moreira, Paulo Nobre B Reis, Aleksandar Sedmak, Luca Susmel, Paulo Tavares
Volume 25,
Pages 1-496 (2020)

1st Mediterranean Conference on Fracture and Structural Integrity, MedFract1

ESIS Publishing House — 2022-10-03

Edited by Stavros Kourkoulis, Francesco Iacoviello, Dimos Triantis, Filippo Berto, Dimitrios Karelakas, Giuseppe Ferro
Volume 26,
Pages 1-438 (2020)

The 6th International E-Conference on Industrial, Mechanical, Electrical and Chemical Engineering (ICIMECE 2020) Special Symposium - Integrity of Mechanical Structure and Material

ESIS Publishing House — 2022-10-03

Edited by Aditya Rio Prabowo, Ubaidillah ., Fitrian Imaduddin
Volume 27,
Pages 1-178 (2020)

1st Virtual European Conference on Fracture - VECF1

ESIS Publishing House — 2022-10-03

Edited by Francesco Iacoviello, Aleksandar Sedmak, Liviu Marsavina, Bamber Blackman, Giuseppe Andrea Ferro, Valery Shlyannikov, Per Stahle, Zhiliang Zhang, Pedro M.G.P. Moreira, Zeljko Bozic, Leslie Banks-Sills
Volume 28,
Pages 1-2450 (2020)

Art Collections 2020, Safety Issue (ARCO 2020, SAFETY)

ESIS Publishing House — 2022-10-03

Edited by Marco Tanganelli, Stefania Viti,
Volume 29,
Pages 1-198 (2020)

IX Eurasian Symposium on the problems of strength and resource in low climatic temperatures (EURASTRENCOLD-2020)

ESIS Publishing House — 2022-10-03

Edited by Valeriy V. Lepov, Theodoros Rousakis, Bisong Mbelle Samuel
Volume 30,
Pages 1-232 (2020)

4th International Conference on Structural Integrity and Durability, ICSID 2020

ESIS Publishing House — 2022-10-03

Edited by Zeljko Bozic, Siegfried Schmauder, Katarina Monkova, Aleksandar Sedmak, Sergio Baragetti, Francesco Iacoviello

Volume 31,
Pages 1-154 (2021)

XXIIth Winter School on Continuous Media Mechanics

ESIS Publishing House — 2022-10-03

Edited by Matveenko Valerii P, Plekhov Oleg A.
Volume 32,
Pages 1-344 (2021)

26th International Conference on Fracture and Structural Integrity

ESIS Publishing House — 2022-10-03

Edited by Vittorio Di Cocco, Paolo Ferro, Luciana Restuccia, Giacomo Risitano, Andrea Spagnoli, Carmine Maletta
Volume 33,
Pages 1-1234 (2021)

The second European Conference on the Structural Integrity of Additively Manufactured Materials

ESIS Publishing House — 2022-10-03

Edited by Filippo Berto, Brech van Hoorweder, Francesco Iacoviello, Juergen Stampfl, Luca Susmel, Jan Torgersen
Volume 34,
Pages 1-274 (2021)

2nd International Workshop on Plasticity, Damage and Fracture of Engineering Materials (IWPDF 2021), 18-20 August 2021, Ankara, Turkey

ESIS Publishing House — 2022-10-03

Edited by Tuncay Yalcinkaya
Volume 35,
Pages 1-278 (2022)

1st Virtual International Conference “In service Damage of Materials: Diagnostics and Prediction

ESIS Publishing House — 2022-10-03

Edited by Petro Yasniy, Hryhoriy Nykyforchyn, Volodymyr Iasniy, Olha Zvirko
Volume 36,
Pages 1-408 (2022)

ICSI 2021 The 4th International Conference on Structural Integrity

ESIS Publishing House — 2022-10-03

Edited by Pedro Moreira, Ing. Paulo Tavares
Volume 37,
Pages 1-1072 (2022)

Fatigue Design 2021, International Conference Proceedings, 9th Edition

ESIS Publishing House — 2022-10-03

Edited by Fabien LEFEBVRE, Pascal SOUQUET
Volume 38,
Pages 1-640 (2022)

7th International Conference on Crack Paths (CP2021)

ESIS Publishing House — 2022-10-03

Edited by Sabrina Vantadori, Stefano Natali, Francesco Iacoviello, Andrea Carpinteri, Filippo Berto
Volume 39,
Pages 1-814 (2022)

15th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures (MRDMS 2021)

ESIS Publishing House — 2022-10-03

Edited by Roman Savrai, Alexander Smirnov
Volume 40,
Pages 1-476 (2022)

2nd Mediterranean Conference on Fracture and Structural Integrity

ESIS Publishing House — 2022-10-03

Edited by Filippo Berto, Vittorio Di Cocco, Francisco Galvez, Stavros K. Kourkoulis, Francesco Iacoviello, Mohamed Hadj Meliani
Volume 41,
Pages 1-766 (2022)

20th European Conference on Fracture

ESIS Publishing House — 2022-10-03

Edited by Zhiliang Zhang, Bjørn Skallerud, Christian Thaulow, Erling Ostby, Jianying He
Volume 3,
Pages 1-2206 (2014)

CHePiCC Summer School

Chiara Bertolin — 2022-10-02

The concept of the Cultural Heritage Protection in Climate Change (CHePiCC) School focuses on built cultural heritage as integral part of cultural landscapes and vice versa, both seriously affected by climate change and related natural catastrophes. Climate change itself is the connecting element and affects both cultural landscapes and cultural heritage. Higher Education (HE) students are given the chance to learn about applicable maintenance, preparedness and preservation measures by developing tailored measures for a given site and by implementing and actually testing their ideas. The concept focuses on the effects of climate change in a certain climate zone, and develops possibilities to teach sustainable, eco-friendly and cost-efficient preparedness measures for built cultural heritage and maintenance measures for cultural landscapes. The whole concept is hybrid, student-centred, following a strict hands-on approach and is research based. The entire concept of the School can easily be transferred to other frameworks.

Third IJFatigue & FFEMS Workshop “Characterization of Crack Tip Fields”